NISSHINBO

SEARCH

Products

  • Photovoltaic Module Manufacturing Equipment
  • Customized Machine

Module Laminator (In-line specifications)

  • Crystal
  • Thin-film
  • Compounds

Go to the “Model Selection Simulator”

Features

Basic function

  • Achieves ±2% temperature uniformity.
  • Achieves vacuum equivalent to 133 Pa or less within 120 seconds.
  • Horizontal elevation chambers and conveyer belts are mounted.

Safety

  • Area sensors are arranged at four points.
  • A mechanical locking structure using knock pins is adopted.
  • Overheat detector function for the heating plate.
    Disconnection detector function for the plate heater.

Operability

  • By adopting the one-touch clamp method (patented),
    diaphragm replacement time is reduced by 50%, and
    required man-hour is reduced by 85%.

    * in-house comparison with the conventional method

  • EVA can be cleaned automatically using a dedicated brush.

Options

  • Module pre-heating function
  • Pin-lift
  • 35 mm-thick module compatible
  • Data logging function

Effective processing area


 Effective processing area Application
PVL1522N 1500mm×2200mm For modules of 6×8, 6-inch cells
PVL1537N 1500mm×3700mm Standard model for thin-film modules
PVL1722N 1700mm×2200mm For modules of 6×10, 6-inch cells
PVL1734N 1700mm×3400mm For modules of 6×10, 5-inch cells
PVL1834N 1800mm×3400mm For modules of 6×10, 6-inch cells
PVL1740N 1700mm×4000mm Four modules of up to 1,600 mm × 800 mm can be processed simultaneously.
PVL2345N 2300mm×4500mm The world's largest model with a high flexibility.

ATTENTION

To view this content, JavaScript must be enabled, and you need the latest version of the Adobe Flash Player.

Page Top